PU Wall Molding Bangladesh | 16 Designs, 95 Inch Decorative Trim

PU wall molding Bangladesh shoppers can choose from 16 coded designs at Best Interior Store. In addition, these gypsum-style decorative strips add clean borders to walls, doors and ceiling edges. For example, choose white, full gold or white with gold trim. Also, each catalog design lists a 95 inch length, so you can plan a matching layout before ordering.

First, compare the gallery photos and read the code below each profile. Then select the same code under Panel Design. As a result, the page updates the price for your choice. White designs cost Tk 400, Gold and GL designs cost Tk 500, while the two 55 mm designs cost Tk 550.

PU Wall Molding Bangladesh: Specifications

For example, TP 2003 carries a 20 mm x 95 inch catalog label. The first measurement identifies the catalog profile size; it does not confirm thickness. Therefore, check the sample if your project needs an exact depth or edge fit.

Design Codes, Catalog Sizes and Prices

Also, use this table to compare the profiles. Inch equivalents describe the catalog size, rather than a verified thickness. All listed lengths remain 95 inch.

PU Wall Molding Bangladesh: Eight Highlights

In addition, the coded photos make it easier to compare finishes before you buy.

1. Choose from 16 designs, so your trim can match the room.
2. Compare white and gold finishes, as well as mixed GL trim.
3. Read the code below each photo, then select the matching swatch.
4. Plan with a 95 inch catalog length, rather than the old imported size.
5. Check six profile sizes, because small and wide trims create different borders.
6. See the selected price before checkout, so you can compare your options.
7. Open the gallery image for a closer look at the grooves and finish.
8. Ask about stock before payment, especially when ordering several matching lengths.

PU Wall Molding Bangladesh: Profile and Finish Guide

White PU Wall Molding Bangladesh Designs

For a simple look, choose a white profile with smooth or stepped lines. For example, TP 3008 has a rounded face, while TP 5006 has a broad flat face. Therefore, match the groove pattern to your wall layout instead of choosing by size alone.

এই PU wall molding Bangladesh পণ্যের প্রতিটি ছবির নিচে কোড ও মাপ দেওয়া আছে। তাই ছবি দেখে পছন্দের কোড বেছে নিন। একই মাপের দুইটি মোল্ডিংয়ের নকশা আলাদা হতে পারে। ঘরের বর্ডার ও প্যানেলের সঙ্গে নকশা মিলিয়ে অর্ডার করুন।

Gold PU Wall Molding Bangladesh Finishes

By comparison, TP 2002 Gold and TP 4011 Gold have a full gold finish. However, TP 2002 GL and TP 4011 GL have white centers with gold edges. Also, both groups cost Tk 500, but their appearance differs. Therefore, check the finish in the photo before selecting your code.

সোনালি Gold ও GL এক ধরনের রং নয়। Gold কোডের মোল্ডিং পুরো সোনালি। অন্যদিকে GL কোডের মাঝখান সাদা এবং দুই ধার সোনালি। তাই শুধু দাম দেখে নয়, ছবির রং ও নকশা মিলিয়ে পছন্দ করুন।

Wide PU Wall Molding Bangladesh Profiles

Meanwhile, TP 5006 and TP 5009 carry 55 mm catalog labels. In addition, these broader profiles cost Tk 550 each. Also, compare their face shapes in the gallery, because they are separate designs. Therefore, ask us to confirm the exact fit if you plan to use one beside an existing skirting line.

PU Wall Molding Bangladesh: Surface Care

In other words, PU means polyurethane. For general background, the industry resource explains that polyurethane materials can take rigid or flexible forms. However, that overview does not certify this product’s fire rating, density or outdoor performance.

For routine care, remove surface dust with a soft cloth. Also, test any cleaner or paint on a small hidden area first. However, avoid harsh scraping on the gold finish, because it may mark the surface. For painting white profiles, ask about a compatible primer and finish before starting.

Installation Guide | মোল্ডিং লাগানোর নিয়ম

First, measure the border and plan the corner joints. Then test the profile against the wall before applying adhesive. Follow the adhesive maker’s instructions, including surface preparation and curing time.

1. ধাপ ১: দেয়ালের ধুলা ও আলগা রং পরিষ্কার করুন। জায়গাটি শুকনো রাখুন।
2. এরপর ধাপ ২: মাপ নিয়ে কোড ও নকশা মিলিয়ে স্ট্রিপ সাজান। কোণার জোড় আগে পরীক্ষা করুন।
3. তারপর ধাপ ৩: উপযোগী আঠা দিয়ে মোল্ডিং বসান। আঠার নির্দেশনা অনুযায়ী প্রয়োজনীয় সাপোর্ট দিন।
4. সবশেষে ধাপ ৪: আঠা শুকানোর সময় দিন। তারপর জোড় ও ফিনিশ পরীক্ষা করুন।

Finally, inspect every joint before painting or finishing the wall. For long ceiling runs or uneven surfaces, ask an installer to check the support needed. We do not list a fixed curing time, because it depends on the adhesive and site conditions.

Where to Use PU Wall Molding Bangladesh Trim

For instance, create rectangular borders on a living room feature wall. Similarly, use matching strips around a doorway or beside a decorative panel. By comparison, narrow profiles suit smaller frames, while wide designs create a stronger border.

Also, compare the room’s existing materials before you buy. Browse our interior decoration products and wall panel collection for matching ideas. If the surface stays wet or faces outdoor weather, confirm suitability before installation.

Sold from Dhaka | শোরুমে নমুনা দেখুন

In addition, Best Interior Store offers PU wall molding Bangladesh customers can compare by code. In addition, you can view physical samples at our Dhaka showroom. Contact us before visiting to confirm the designs you want to see.

আমাদের ঢাকার শোরুমে এসে নকশা ও রং সরাসরি দেখতে পারবেন। তাই বড় অর্ডারের আগে পছন্দের কোড জানান। স্টক, পরিমাণ ও ডেলিভারির তথ্য নিশ্চিত করে তারপর অর্ডার করুন। বিস্তারিত জানতে শোরুমের ঠিকানা ও যোগাযোগের তথ্য দেখুন।

কেন Best Interior Store বেছে নেবেন?

প্রতিটি ডিজাইনের আলাদা কোড আছে। ফলে পছন্দের মোল্ডিং চেনা সহজ। ছবির নিচের মাপ দেখে প্রাথমিক পরিকল্পনা করতে পারবেন। Gold, GL ও সাদা রং তুলনা করে নিজের ঘরের সঙ্গে মানানসই কোড বেছে নিন।

এছাড়া বড় পরিমাণে অর্ডারের আগে একই কোডের স্টক জেনে নিন। কোণার জোড়ের জন্য বাড়তি দৈর্ঘ্য প্রয়োজন হতে পারে। তাই কাজের মাপ ও প্রয়োজনীয় পরিমাণ আগে হিসাব করুন। কোনও তথ্য অস্পষ্ট হলে অর্ডারের আগে আমাদের জানান।

PU Wall Molding Bangladesh: Common Questions

1. What does PU mean?

In other words, PU stands for polyurethane. In this listing, it describes the material of the gypsum-style decorative trim.

2. How many designs can I select?

For example, you can choose 16 coded profiles. Therefore, compare both the shape and finish in the gallery before selecting a swatch.

3. What length does the catalog show?

Also, each listed code shows 95 inch. However, confirm the supplied length before ordering if your installation requires a precise end-to-end measurement.

4. Does 20 mm or 55 mm mean thickness?

In fact, the photos label the catalog profile size. They do not verify thickness, so ask us to check the sample depth when fit matters.

5. Which finishes cost Tk 500?

Similarly, both full Gold designs and mixed GL designs cost Tk 500. By comparison, the other white designs cost Tk 400, except the 55 mm options.

6. Why do TP 5006 and TP 5009 cost Tk 550?

In this case, these are the two 55 mm designs in this listing. Also, they have different profile shapes, so choose the code that matches your plan.

7. How do I order the correct profile?

First, read the code beneath the photo. Then select that code under Panel Design and check the updated price before adding to cart.

8. Can I repaint a white profile?

First, ask about a compatible primer and paint first. Also, test a hidden area before coating the full strip.

9. Where can I see a physical sample?

For example, visit our Dhaka showroom after confirming stock. That way, you can compare the shape and finish before a larger order.

10. How should I plan a bulk order?

First, measure the full border, then allow for cuts and corner joints. Finally, contact us with the code and quantity to confirm stock and delivery.

To choose PU wall molding Bangladesh buyers can match to their rooms, start with the code, size and finish. Then check the selected price and ask us about stock before checkout.